Space

Equipment targeted for space should operate as designed without margin of error. We can help the industry meet these critical mission features. In terms of delivering electrical equipment, electromagnetic and environmental performances are critical issues that every manufacturer should consider.

Since in-service maintenance is almost impossible, one component or subassembly should not be affected by the other, and both components and all units must not be susceptible to gas and moisture in extreme temperatures, variable environmental pressures, and dust-containing environments.

EUROLAB's laboratory environment can assist in the assessment of components and equipment for these different, extraterrestrial challenges.

Electrics

Our experienced electrical engineers can conduct R & D phased equipment evaluation by checking everything from surge protection to leakage and clearance to help protect against short circuits. We can also help verify the basic design to ensure that the equipment works as intended.

EMC

With test item sizes ranging from 3 to 10 meters, we offer fully anechoic and semi-anechoic chambers to test emissions and immunity. 

We test according to the following Standards:

DEF STAN 59-411 and 61-5 and EN Standards
MIL STD 461 includes: EMC spread immunity / sensitivity; emitted emissions; mass flow injection; performed immunity / sensitivity; emissions achieved; and 2MHz to 40 GHz and 10KHz MIL STD 461 RS103 to 200V / m field strength spread capability
Electromagnetic Interference (EMI) Test
Calibration Services
SEMI F47 Test
Wireless Inductive Charge Test

Environment

EUROLAB offers a wide range of rooms to test the influence of temperature, vibration, shock, mechanical wear and dust / moisture input and light spectrum. Our rooms are regularly tested for aerospace, military, IT and industrial applications and we can simulate altitudes up to 100.000 feet (30.000 meters). We can test according to the IEC 60068-xy series listed below and MIL, DEF and RTCA standards or we can design a custom test program according to your needs.

MIL-STD-810G
500.5 Low Pressure (Height)
501.5 High Temperature
502.5 Low Temperature
503.5 Temperature Shock
504.1 Contamination with Liquids
506.5 Rain
507.5 Humidity
509.5 Salt Mist
510.5 Sand and Powder
511.5 Explosive Atmosphere
512.5 Dipping
513.6 Acceleration
514.6 Vibration
515.6 Acoustic Noise

IEC Standards

60068-1 General and guidance
60068-2-1 Tests - Test A: Cold
60068-2-2 Tests - Test B: Dry heat
60068-2-5 Tests - Test Sa: Simulated solar radiation
60068-2-6 Tests - Test Fc: Vibration
60068-2-7 Tests - Test Ga and guidance: Acceleration, steady state
60068-2-11 Tests - Test Ka: Salt mist
60068-2-13 Tests - Test M: Low air pressure
60068-2-14 Tests - Test N: Temperature change
60068-2-17 Tests - Test Q: Sealing
60068-2-18 Tests - Test R and guidance: Water
60068-2-27 Tests - Ea Test and Guidance: Shock
60068-2-30 Tests - Test Db: Damp heat, cyclic (12 clock + 12 clock)
60068-2-31 Tests - Test Ec: First of all, demanding shocks for equipment type samples
60068-2-38 Tests - Test Z / AD: Composite temperature / humidity cyclic test

radio

We also specialize in radio equipment and offer testing services for radio transmitters for Radio Transmitter and Receiving Equipment (Transmitter frequency range: power output from 10 kHz to 4 GHz, 150 watts).

We test according to the following Standards:

ETSI EN 300 220-1 V2.3.1
ETSI EN 300 220-1 V2.4.1
ETSI EN 300 220-2 V2.3.1
ETSI EN 300 220-2 V2.4.1
ETSI EN 300 330-1 V1.3.1
ETSI EN 300 330-2 V1.3.1
ETSI EN 301 489-1, V1.2.1
ETSI EN 301 489-1, V1.3.1
ETSI EN 301 489-1 V1.8.1
ETSI EN 301 489-3 V 1.3.1
ETSI EN 301 489-5, V1.2.1 (PMR)
ETSI EN 301 489-7, V1.1.1 (900, 1800 GSM) 301-489, V9 (SRD)

Materials

EUROLAB has Nadcap approval and offers extensive mechanical testing of plastics and advanced composite materials. EUROLAB is a nationally recognized testing laboratory and our accreditations include ISO 17025, Nadcap, UKAS, which are accredited for military and commercial EMC Testing.